Data Projector
VPL-CWZ10/CXZ10
Using Eco Mode
The [With No Input] and [With Static Signal] of the Eco Mode settings are easy to use.
Note
If [ECO Mode] is set to [ECO] or if [Standby Mode] for [User] is set to [Low], you will no longer be able to use network control
functions while in Standby Mode. If performing external control via networks and network control functions and so on, either do
not select [ECO] or do not set [Standby Mode] for [User] to [Low].
Related Topic
Parts and Controls (Remote Commander and Control Panel)
5-014-280-13(1) Copyright 2020 Sony Corporation
Press the ECO MODE key to display the [ECO Mode] menu.
1
Press the
/
(Up/Down) key or the ECO MODE key, then select either [ECO] or [User] mode.
[ECO]: Set each setting to the value that saves the most energy.
With No Input: [Standby]
With Static Signal: [Light Dimming]
[User]: Configure the Eco Mode settings manually.
2
Press the RETURN key to return to the previous screen.
3
42
Summary of Contents for VPL-CWZ10
Page 34: ...5 014 280 13 1 Copyright 2020 Sony Corporation 34 ...
Page 57: ...Related Topic Aspect Ratio 5 014 280 13 1 Copyright 2020 Sony Corporation 57 ...
Page 108: ...Related Topic Updating Software 5 014 280 13 1 Copyright 2020 Sony Corporation 108 ...
Page 153: ...5 014 280 13 1 Copyright 2020 Sony Corporation 153 ...
