Sony VPL-CWZ10 Help Manual Download Page 10

Page: 10 / 184

Help Guide

Data Projector

VPL-CWZ10/CXZ10

Attaching the Air Filter (For the Customers in India only)

The supplied accessories required vary depending on the installation method.

For installing to the floor

For installing to the ceiling

Attach the dust cover assembly to the unit by pushing the two levers on it. (The product is pre-fitted with a dust cover
assembly when shipped.)

Remove the air filter (B) from the dust cover assembly (A), and then attach the air filter to the air filter cover
(C).

Pull the pull stick (D) upwards when removing the air filter from the dust cover assembly.
When attaching the air filter to the air filter cover, make sure the correct side is being attached so that the pull stick
is protruding from the air filter.

Attach the air filter cover to the unit by pushing the two levers on it.

Summary of Contents for VPL-CWZ10

















































































































































































Search results

Summary of Contents for VPL-CWZ10

Reviews:

Brands by name

Popular brands

Sony VPL-CWZ10, Help Manual

Search results

Summary of Contents for VPL-CWZ10

Reviews:

Brands by name

Popular brands