Sony VGX-TP3E/B Page 49 User Manual Download

Page: 49 / 151

Using Your VAIO Computer

Locating buttons on the remote commander

✍

Illustrated above is the English remote commander as an example.

Pause

button

Press to pause media playback. Press again to resume
playback.
Stop

button

Press to stop media playback or TV recording session.
Forward

button

Press to fast-forward media at three speeds.
Skip

button

Press to move media forward, for example, one audio track, one
DVD chapter, and 30 seconds of recorded TV or video.
Replay

button

Press to move media backward, for example, one audio track,
one DVD chapter, and 7 seconds of TV or video.
Rewind

button

Press to move media backward at three speeds.
Record

button

Press to begin recording.
Play

button

Press to begin media playback.

Back button
Press to return to the previous window.

Volume control buttons
Press to increase (+) or decrease (-) the volume.

Recorded TV button
Press to view previously recorded TV programs.

Summary of Contents for VGX-TP3E/B
























































































































































Search results

Summary of Contents for VGX-TP3E/B

Reviews:

Related manuals for VGX-TP3E/B

Brands by name

Popular brands

Sony VGX-TP3E/B, User Manual

Search results

Summary of Contents for VGX-TP3E/B

Reviews:

Related manuals for VGX-TP3E/B

Brands by name

Popular brands