Sony VGX-TP3E/B User Manual Download

Page: 132 / 151

132

Troubleshooting

Display

What should I do if my TV screen remains blank?

❑

Make sure that both power cords of your computer and TV are securely plugged into power sources.

❑

Make sure that your computer and TV are properly connected.

❑

Make sure that both your computer and TV are turned on.

❑

When two displays are connected to your computer, make sure that the display settings are correct on the other display.
See

Selecting Display Modes

(page 77)

What should I do if my TV screen is dark?

❑

Adjust the brightness control on your TV to brighten the screen. See the manual that came with your TV for the detailed
instructions.

❑

Check other inputs on your TV for brightness. If they also appear dark, see the manual that came with your TV for
adjustment.

What should I do if my TV screen shows distorted images?

Make sure that your computer and TV are properly connected.

Summary of Contents for VGX-TP3E/B
























































































































































Search results

Summary of Contents for VGX-TP3E/B

Reviews:

Related manuals for VGX-TP3E/B

Brands by name

Popular brands

Sony VGX-TP3E/B, User Manual

Search results

Summary of Contents for VGX-TP3E/B

Reviews:

Related manuals for VGX-TP3E/B

Brands by name

Popular brands