Sony VGN-Z11AWN/B User Manual Download Page 49

Page: 49 / 218

Using Your VAIO Computer

Inserting an ExpressCard Module

Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.

✍

You do not need to shut down your computer before inserting or removing the ExpressCard module.

To insert an ExpressCard module

Locate the ExpressCard slot.

Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.

✍

If the module or adapter does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Make sure you use the most recent software driver provided by the ExpressCard module manufacturer.

Summary of Contents for VGN-Z11AWN/B



























































































































































































































Search results

Summary of Contents for VGN-Z11AWN/B

Reviews:

Related manuals for VGN-Z11AWN/B

Brands by name

Popular brands

Sony VGN-Z11AWN/B, User Manual

Search results

Summary of Contents for VGN-Z11AWN/B

Reviews:

Related manuals for VGN-Z11AWN/B

Brands by name

Popular brands