Sony VGN-TZ31MN/N User Manual Download

Page: 172 / 218

172

Troubleshooting

What should I do if my game software does not work or it keeps crashing?

❑

Check the Web site of the game if there are any patches or updates to download.

❑

Make sure you have installed the latest video driver.

❑

On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is
not guaranteed.

What should I do if I cannot remember the BIOS password?

If you have forgotten the BIOS password, contact VAIO-Link to reset it. A reset fee will be charged.

Why does it take time before my computer starts?

❑

If the firewall of Norton 360 is active, it may take some time before the desktop screen appears due to network security
checkups.

❑

If the TPM is enabled, it will take longer before the VAIO logo appears due to security checks at computer startup.

Summary of Contents for VGN-TZ31MN/N



























































































































































































































Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands

Sony VGN-TZ31MN/N, User Manual

Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands