Sony VGN-TZ31MN/N User Manual Download

Page: 157 / 218

157

Precautions

On Using the Built-in MOTION EYE Camera

❑

Do not touch the lens protection cover of the built-in

MOTION EYE

camera, as it may cause scratches on the cover and

such scratches will appear on the captured images.

❑

Do not let the direct sunlight get into the scope of the built-in

MOTION EYE

camera regardless of your computer's power

state, as it may cause a malfunction of the camera.

❑

The built-in

MOTION EYE

camera is disabled while videos or still images are imported from an i.LINK-compatible device

connected to the i.LINK port.

❑

Clean the lens protection cover of the built-in

MOTION EYE

camera with a blower brush or a soft brush. If the cover is

extremely dirty, wipe it off with a soft dry cloth. Do not rub the cover, as it is force-sensitive.

Summary of Contents for VGN-TZ31MN/N



























































































































































































































Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands

Sony VGN-TZ31MN/N, User Manual

Search results

Summary of Contents for VGN-TZ31MN/N

Reviews:

Related manuals for VGN-TZ31MN/N

Brands by name

Popular brands