Sony VGN TZ11XN - VAIO TZ Series User Manual Download Page 57

Page: 57 / 213

Using Your VAIO Computer

Always insert the correct memory card into the SD memory card slot.

SD memory cards with capacity of up to 2 GB and SD High Capacity (SDHC) memory cards with capacity of up to 4 GB have been tested and found

compatible with your computer.

Do not attempt to insert a memory card or memory card adapter of a different type into the slot. An incompatible memory card or memory card adapter

may be difficult to remove from the slot and can cause damage to your computer.

Use care when inserting or removing a memory card from the slot. Do not force the memory card in or out of the slot.

The SD memory card slot on your computer does not support the copyright protection and high-speed data transfer features of the SD memory card.

Your computer has been tested and found compatible only with major memory card media available as of January 2007. However, not all memory card

media that meet the same conditions as the compatible media are guaranteed of compatibility.

You cannot use a memory card if you select the option to disable the SD memory card slot with the Peripheral Device & Storage Media Restriction

Setting Utility or power supply to the SD memory card slot on the VAIO Power Management tab in the Power Options window. To change the settings,
see Protecting Data from Unauthorized Use

(page 138)

or Activating VAIO Power Management Power Schemes

(page 135)

Summary of Contents for VGN TZ11XN - VAIO TZ Series






















































































































































































































Search results

Summary of Contents for VGN TZ11XN - VAIO TZ Series

Reviews:

Sony VGN TZ11XN - VAIO TZ Series, User Manual, Page: 57 / 213

Search results

Summary of Contents for VGN TZ11XN - VAIO TZ Series

Reviews: