manualshive.com logo in svg

Sony VGN TZ11XN - VAIO TZ Series, User Manual

The Sony VGN TZ11XN from the VAIO TZ Series is an exceptional laptop designed for professionals on the go. Elevate your productivity with this sleek and powerful device. Download the free User Manual from manualshive.com to maximize your experience and explore all the features this remarkable laptop has to offer.

Share
Download
background image

133

n

N

Customizing Your VAIO Computer

✍

If you do not use your computer for a long period of time, place the computer into Hibernate mode. This power saving mode saves you the time of 
shutting down or resuming.

When your computer is in Hibernate mode, you cannot insert a disc.

Hibernate mode requires more time than Sleep mode to be activated.

It takes more time to return to Normal mode from Hibernate mode than from Sleep mode.

Hibernate mode uses less power than Sleep mode.

You can use VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid. This power resuming 
preference will be lost if you remove both the AC adapter and the battery pack. See Setting Up Your Computer with VAIO Control Center 

(page 127)

.

!

Do not move your computer before its power indicator light turns off.

  

Summary of Contents for VGN TZ11XN - VAIO TZ Series






















































































































































































































Reviews:

No comments

Related manuals for VGN TZ11XN - VAIO TZ Series

ADLINK Technology MXC-2300 Manual preview
MXC-2300
Brand: ADLINK Technology Pages: 76
Advantech AiMC-3402 Startup Manual preview
AiMC-3402
Brand: Advantech Pages: 17
NUANCE PowerScribe User Manual preview
PowerScribe
Brand: NUANCE Pages: 2
Casio PA-2400U Service Manual And Parts List preview
PA-2400U
Brand: Casio Pages: 81
Datapath Vision800-ATX Quick Start Manual preview
Vision800-ATX
Brand: Datapath Pages: 14
Compaq Presario Notebook PC Hardware Setup preview
Presario Notebook PC
Brand: Compaq Pages: 1
Compaq Presario CQ3300 - Desktop PC Quick Setup Manual preview
Presario CQ3300 - Desktop PC
Brand: Compaq Pages: 1
Compaq iPAQ IA-2 Quick Setup preview
iPAQ IA-2
Brand: Compaq Pages: 2
Compaq Deskpro Workstation AP230 Quickspecs preview
Deskpro Workstation AP230
Brand: Compaq Pages: 31
Compaq Deskpro EN Series Hardware Reference Manual preview
Deskpro EN Series
Brand: Compaq Pages: 53
Compaq dc7800 - Convertible Minitower PC Illustrated Parts & Service Map preview
dc7800 - Convertible Minitower PC
Brand: Compaq Pages: 4
Compaq Deskpro 4000S - Desktop PC Reference Manual preview
Deskpro 4000S - Desktop PC
Brand: Compaq Pages: 142
Cybernet iOne-H19 Series User Manual preview
iOne-H19 Series
Brand: Cybernet Pages: 33
Shuttle SH61R5 Series Quick Manual preview
SH61R5 Series
Brand: Shuttle Pages: 1
Shuttle Prima XPC Barebone SX48P2 Deluxe User Manual preview
Prima XPC Barebone SX48P2 Deluxe
Brand: Shuttle Pages: 58
LEXIBOOK JC250SPGB Instruction Manual preview
JC250SPGB
Brand: LEXIBOOK Pages: 5
Shuttle SH61R4 Product Specification preview
SH61R4
Brand: Shuttle Pages: 10
Shuttle X70 SERIES Quick Manual preview
X70 SERIES
Brand: Shuttle Pages: 1

Brands by name

Popular brands

Load more brands