manualshive.com logo in svg

Sony VGN TZ11XN - VAIO TZ Series, User Manual, Page: 126 / 213

Share
Download
Sony VGN TZ11XN - VAIO TZ Series User Manual Download Page 126

126

n

N

Customizing Your VAIO Computer

To install the Infineon TPM Professional Package

Read the Readme.txt in the C:\Infineon\Readme folder. Then, double-click C:\Infineon\setup.exe to install the package.

To install this package, you must have administrator rights on the computer.

!

You need to set a few passwords while installing Infineon TPM Professional Package. Without these passwords, you will not be able to restore any 
TPM-protected data or backup files. Be sure to write down the passwords and keep them safe and private from other people.

To initialize and configure the TPM

See the online documentation for detailed information. To open the documentation, click Start, All Programs, Infineon 
Security Platform Solution, and Help.

!

The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liabilities for any defects arising out 
of your data maintenance and management.

  

Summary of Contents for VGN TZ11XN - VAIO TZ Series






















































































































































































































Reviews:

No comments