Sony VGN-TX2HP/W User Manual Download

Page: 74 / 170

Using Peripheral Devices

Disconnecting Your Computer from the Port Replicator

To prevent loss of unsaved data, be sure to turn off the computer before disconnecting it from the port replicator.

To disconnect your computer from the port replicator

Turn off the computer and the connected peripherals.

Lift the computer away from the port replicator.

Close the port replicator cover on the bottom of the computer.

✍

It is extremely important to close the port replicator connector cover after disconnecting the computer from the port replicator. If the cover is left open,
dust may get inside and damage the computer.

To disconnect the port replicator completely from AC power, unplug the AC adapter.

Summary of Contents for VGN-TX2HP/W











































































































































































Search results

Summary of Contents for VGN-TX2HP/W

Reviews:

Related manuals for VGN-TX2HP/W

Brands by name

Popular brands

Sony VGN-TX2HP/W, User Manual

Search results

Summary of Contents for VGN-TX2HP/W

Reviews:

Related manuals for VGN-TX2HP/W

Brands by name

Popular brands