Sony VGN-SZ60MN/B User Manual Download Page 23

Page: 23 / 215

Getting Started

Connecting a Power Source

You can use either an AC adapter or a rechargeable battery pack as a power source for your computer.

Using the AC Adapter

✍

Use your computer only with the supplied AC adapter.

To use the AC adapter

Plug one end of the power cord (1) into the AC adapter (3).

Plug the other end of the power cord into an AC outlet (2).

Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer or on the optional docking station.

The shape of the DC In plug varies depending on the AC adapter.

✍

To disconnect your computer completely from AC power, unplug the AC adapter.

Make sure that the AC outlet is easily accessible.

If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode

(page 134)

This power saving mode saves the time of shutting down or resuming.

Summary of Contents for VGN-SZ60MN/B
























































































































































































































Search results

Summary of Contents for VGN-SZ60MN/B

Reviews:

Related manuals for VGN-SZ60MN/B

Brands by name

Popular brands

Sony VGN-SZ60MN/B, User Manual

Search results

Summary of Contents for VGN-SZ60MN/B

Reviews:

Related manuals for VGN-SZ60MN/B

Brands by name

Popular brands