Sony VGN-SZ1HP/B User Manual Download

Page: 60 / 218

Using Your VAIO Computer

Removing a Memory Card

To remove a memory card from the memory card adapter for the ExpressCard/34 slot

See Removing an ExpressCard/34 Media

(page 50)

to remove the memory card adapter from the ExpressCard/34 slot.

Then, firmly grasp the extended part of the memory card and carefully pull it out of the memory card adapter.

To remove a memory card from the memory card adapter for the PC Card slot

See Removing a PC Card

(page 47)

to remove the memory card adapter from the PC Card slot. Then, firmly grasp the

extended part of the memory card and carefully pull it out of the memory card adapter.

Summary of Contents for VGN-SZ1HP/B



























































































































































































































Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands

Sony VGN-SZ1HP/B, User Manual

Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands