Sony VGN-SZ1HP/B User Manual Download

Page: 147 / 218

147

Customizing Your VAIO Computer

Check that your modem is listed in the Modems tab.
If your modem is not listed, click Add and follow the wizard.

Click Apply/OK. Your modem is configured.

✍

Before applying new country settings, please make sure your phone cable is disconnected from your computer.

Updating the Modem Driver

To update the modem driver

Click Start and then Control Panel.

Click Printers and Other Hardware.

Click Phone and Modem Options.
The Phone and Modem Options window appears.

Click the Modems tab and then click Properties to view the properties of your modem.
The Modem Properties window appears.

On the Driver tab, click Update driver.
The Hardware Update Wizard window appears.
Follow the on-screen instructions. You can perform a Windows search for the driver, or point to the driver's location
yourself.

Summary of Contents for VGN-SZ1HP/B



























































































































































































































Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands

Sony VGN-SZ1HP/B, User Manual

Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands