Sony VGN-SZ1HP/B User Manual Download Page 134

Page: 134 / 218

134

Customizing Your VAIO Computer

Setting Up Your Computer with VAIO Control Center

The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior.

To use VAIO Control Center

Click Start, point to All Programs, and click VAIO Control Center.
The VAIO Control Center window appears.

Select the desired control item and change the settings.

Once finished, click OK.
The setting of the desired item has been changed.

✍

For more information about each option, click Help on the VAIO Control Center window to display the help file.

Some of the control items will not be visible if you open VAIO Control Center as a limited user.

Summary of Contents for VGN-SZ1HP/B



























































































































































































































Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands

Sony VGN-SZ1HP/B, User Manual

Search results

Summary of Contents for VGN-SZ1HP/B

Reviews:

Related manuals for VGN-SZ1HP/B

Brands by name

Popular brands