Sony VGN-SR3 User Manual Download

Page: 195 / 220

Troubleshooting

Display

Why did my screen go blank?

❑

Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If
the computer is in LCD (Video)

Sleep mode, press any key to bring the computer back into Normal mode. See

Using the

Power Saving Modes

(page 135)

for more information.

❑

Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.

❑

If your computer is using battery power, make sure the battery pack is installed properly and is charged. See

Using the

Battery Pack

(page 23)

for more information.

❑

If the display output is directed to the external display, press the

keys. See

Combinations and Functions with

the Fn Key

(page 33)

for more information.

What should I do if no image is displayed on my TV screen or external display connected
to the HDMI output port?

This Q & A entry applies to models with the

HDMI

output port only. See the online specifications to find out whether your computer is equipped with

the

HDMI

output port.

Make sure you are using an HDCP-compliant display. The copyright protected contents are not displayed on a non-HDCP
compliant display. See

Connecting a Computer Display

(page 88)

for more information.

Summary of Contents for VGN-SR3





























































































































































































































Search results

Summary of Contents for VGN-SR3

Reviews:

Related manuals for VGN-SR3

Brands by name

Popular brands

Sony VGN-SR3, User Manual

Search results

Summary of Contents for VGN-SR3

Reviews:

Related manuals for VGN-SR3

Brands by name

Popular brands