Sony VGN-SR21M/S User Manual Download

Page: 23 / 218

Getting Started

Connecting a Power Source

You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer.

Using the AC Adapter

✍

Use only the supplied AC adapter for your computer.

To use the AC adapter

Plug one end of the power cord (1) into the AC adapter (3).

Plug the other end of the power cord into an AC outlet (2).

Plug the cable connected to the AC adapter (3) into the

DC IN

port (4) on the computer or on the optional docking station.

The shape of the DC In plug varies depending on the AC adapter.

✍

To disconnect your computer completely from AC power, unplug the AC adapter.

Make sure that the AC outlet is easily accessible.

If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See

Using Hibernate Mode

(page 135)

This power saving mode saves the time of shutting down and resuming.

Summary of Contents for VGN-SR21M/S



























































































































































































































Search results

Summary of Contents for VGN-SR21M/S

Reviews:

Related manuals for VGN-SR21M/S

Brands by name

Popular brands

Sony VGN-SR21M/S, User Manual

Search results

Summary of Contents for VGN-SR21M/S

Reviews:

Related manuals for VGN-SR21M/S

Brands by name

Popular brands