Sony VGN-SR21M/S User Manual Download

Page: 193 / 218

Troubleshooting

Display

Why did my screen go blank?

❑

Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If
the computer is in LCD (Video)

Sleep mode, press any key to bring the computer back into Normal mode. See

Using the

Power Saving Modes

(page 132)

for more information.

❑

Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.

❑

If your computer is using battery power, make sure the battery pack is installed properly and is charged. See

Using the

Battery Pack

(page 24)

for more information.

❑

If the display output is directed to the external display, press the

keys. See

Combinations and Functions with

the Fn Key

(page 33)

for more information.

What should I do if no image is displayed on my TV screen or external display connected
to the HDMI port?

This Q & A entry applies to selected models with the

HDMI

port only. See the online specifications to find out whether your computer is equipped with

the HDMI port.

Make sure you are using an HDCP-compliant display. The copyright protected contents are not displayed on a non-HDCP
compliant display. See

Connecting a Computer Display

(page 83)

for more information.

Summary of Contents for VGN-SR21M/S



























































































































































































































Search results

Summary of Contents for VGN-SR21M/S

Reviews:

Related manuals for VGN-SR21M/S

Brands by name

Popular brands

Sony VGN-SR21M/S, User Manual

Search results

Summary of Contents for VGN-SR21M/S

Reviews:

Related manuals for VGN-SR21M/S

Brands by name

Popular brands