manualshive.com logo in svg

Sony VGN-S3HP, User Manual

Share
Download
Sony VGN-S3HP User Manual Download Page 43

43

n

N

Using your VAIO computer

Using PC Cards

Your VAIO computer is equipped with a PC Card slot. PC Cards allow you to connect portable external devices.

You do not need to shut down your computer before inserting or removing a PC Card.

Inserting a PC Card

VGN-S series

To insert a PC Card, proceed as follows:

1

Insert the PC Card into the PC Card slot with the front label facing upwards.

2

Gently push the PC Card into the connector.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears in the system tray.

VGN-T series

To insert a PC Card, proceed as follows:

1

Push the PC Card release button so that the release button pops out.

2

Push the PC Card release button a second time so that the PC card slot protector pops out.

3

Gently take hold of the card and pull it out of the slot.

4

Insert the PC Card into the PC Card slot with the front label facing upwards.

5

Gently push the PC Card into the connector.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears in the system tray.

Summary of Contents for VGN-S3HP
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands