Sony VGN-P11Z/G User Manual Download

Page: 77 / 173

Using Peripheral Devices

Connecting an Optical Disc Drive

To use optical CDs and DVDs with your computer, you need to connect an external optical disc drive (not supplied) to your
computer.

Connecting an Optical Disc Drive

Be sure to connect an external optical disc drive before you launch any preinstalled disc operation program.

To connect an optical disc drive

Plug the power cord (if any) of your external optical disc drive (not supplied) (1) into an AC outlet.

Choose the USB port (2)

you prefer to use.

Plug one end of a USB cable (not supplied) (3) into the USB port, and the other end to the optical disc drive.
See the manual that came with your external optical disc drive for the detailed instructions on connecting the USB cable
to the drive.

Summary of Contents for VGN-P11Z/G














































































































































































Search results

Summary of Contents for VGN-P11Z/G

Reviews:

Related manuals for VGN-P11Z/G

Brands by name

Popular brands

Sony VGN-P11Z/G, User Manual

Search results

Summary of Contents for VGN-P11Z/G

Reviews:

Related manuals for VGN-P11Z/G

Brands by name

Popular brands