background image

 

 

    P/N  994644000     Rev. C 

1/2 

 

VGN-N1xx Series Optical Disk Drive 

Replacement Instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Step 1.

 Eject the Drive  Tray.   

 
Power on the PC, eject the 
CD/DVD drive tray by pressing the 
button on the drive door.  
 
Next, properly turn off the PC, 
leaving the tray ejected. 

 

Step 2.

 Prepare the Computer.   

 
Close the screen. Place your 
computer upside down on a 
protected surface with the front 
edge facing towards you. 
 
The CD/DVD drive tray should 
now be facing towards the right 
side of the unit. 

 

Step 3.

 Remove the Battery Pack. 

 

CAUTION! Disconnect the 

power cord and remove the 
battery. Failure to do so can result 
in damage to the PC. 

 

 

IMPORTANT!   

PLEASE READ BEFORE YOU START  

 

These easy instructions are intended to guide you through the replacement process.  
 

 

ü

 

To avoid electric shock, please make sure product is turned off and AC Adaptor is disconnected from 
the power source. Remove jewelry before you begin work to avoid scratching the surface of your 
notebook computer.* 

 

ü

 

Place your notebook computer on a clean, stable and covered surface to avoid damage to the 
computer’s case.* 

 

ü

 

Follow the ESD (Electrostatic Discharge) damage prevention instructions: 

o

 

Hold parts by the edges, away from exposed circuitry when possible. 

o

 

Do not walk around excessively as this promotes static build-up. 

 

ü

 

The appearance of the electronic components shown in the illustrations may be different from the 
components shipped. This slight difference does not affect the accuracy of these instructions.   

 

 

* Sony is not responsible for any loss of data associated with your computer or any damage caused by incorrect handling 

of the computer under these procedures. The terms of your Sony limited warranty continue to apply. 

Push tabs in the release direction 

Reviews: