Sony VGN-G21VN/B User Manual Download

Page: 76 / 186

Using Peripheral Devices

Connecting a Universal Serial Bus (USB) Device

To prevent your computer and/or USB devices from damage, observe the following:

❑

When moving the computer with USB devices connected, avoid any shock or force to the USB ports.

❑

Do not put the computer into a bag or carrying case when it has USB devices connected.

You cannot write data to USB devices if you select the option to restrict the USB ports to read-only access with the

Peripheral Device & Storage Media

Restriction Setting Utility

. To change the setting, see

Protecting Data from Unauthorized Use

(page 115)

Connecting a USB Mouse

To connect a USB mouse

Choose the USB port (1)

you prefer to use.

Plug the USB mouse cable (2) into the USB port.
You can now use your USB mouse (not supplied) (3).

Summary of Contents for VGN-G21VN/B



























































































































































































Search results

Summary of Contents for VGN-G21VN/B

Reviews:

Related manuals for VGN-G21VN/B

Brands by name

Popular brands

Sony VGN-G21VN/B, User Manual

Search results

Summary of Contents for VGN-G21VN/B

Reviews:

Related manuals for VGN-G21VN/B

Brands by name

Popular brands