Troubleshooting
Audio/Video
What should I do if I cannot use my i.LINK device?
If it is prompted that the i.LINK device seems to be disconnected or turned off, the i.LINK cable may not be securely plugged
into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See
Connecting an i.LINK Device
for more information.
✍
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection
may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK connection can
communicate with each other. See the manual that came with your compatible i.LINK device for more information on operating conditions and proper
connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm their operating system
compatibility and required operating conditions.
How do I turn off the Windows startup sound?
To turn off the Windows startup sound, follow these steps:
1
Click
Start
and
Control Panel
.
2
Click
Hardware and Sound
.
3
Click
Manage audio devices
under
Sound
.
4
On the
Sounds
tab, click to cancel the
Play Windows Startup sound
check box.
5
Click
OK
.
