Sony VGN-G11VN/T User Manual Download Page 132

Page: 132 / 202

132

Customizing Your VAIO Computer

VAIO Power Management Viewer

To start VAIO Power Management Viewer

Click

on the VAIO Power Management tab.

Alternatively, you can click Start, All Programs, VAIO Control Center, and VAIO Power Management Viewer to start the
viewer.

To change the power scheme

Select the desired power scheme from the drop-down list on VAIO Power Management Viewer.

To view performance with the power scheme modified with VAIO Power Management

When both VAIO Power Management and VAIO Power Management Viewer are running, VAIO Power Management
Viewer shows performance with the power scheme that was modified with VAIO Power Management.

✍

Use VAIO Power Management to set up or modify the power scheme.

Summary of Contents for VGN-G11VN/T











































































































































































































Search results

Summary of Contents for VGN-G11VN/T

Reviews:

Related manuals for VGN-G11VN/T

Brands by name

Popular brands

Sony VGN-G11VN/T, User Manual

Search results

Summary of Contents for VGN-G11VN/T

Reviews:

Related manuals for VGN-G11VN/T

Brands by name

Popular brands