Sony VGN-FZ21E User Manual Download

Page: 75 / 175

Using Peripheral Devices

Connecting an External Display

You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.

✍

Connect the power cord after connecting all other cables.

Connected external displays are used as secondary screens.

On the Windows operating system, you can also use an external display to set up multiple monitors.

Connecting a Computer Display

You can connect a computer display (monitor) to your computer.

To connect a computer display

If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.

Plug the display cable (2) (not supplied) into the monitor (VGA) port (3)

on the computer.

If your computer includes the NVIDIA video controller and you want to connect a TFT/DVI monitor, use an HDMI cable
(not supplied) and an HDMI to DVI-D adapter (not supplied) to connect the TFT/DVI monitor to the

HDMI

port on the

computer.

Summary of Contents for VGN-FZ21E
















































































































































































Search results

Summary of Contents for VGN-FZ21E

Reviews:

Related manuals for VGN-FZ21E

Brands by name

Popular brands

Sony VGN-FZ21E, User Manual

Search results

Summary of Contents for VGN-FZ21E

Reviews:

Related manuals for VGN-FZ21E

Brands by name

Popular brands