Sony VGN-FZ11E User Manual Download

Page: 163 / 171

163

Troubleshooting

How do I output the Dolby Digital or DTS sound through an HDMI-compatible device?

This Q & A entry applies to models with the NVIDIA video controller only.

To output the Dolby Digital or DTS sound from a disc through an HDMI-compatible device connected to your computer, follow
these steps:

Click Start and Control Panel.

Click Hardware and Sound.

Click Manage audio devices under Sound.

On the Playback tab, select the HDMI icon and click Properties.

Click Supported Formats tab.

Click to select the DTS audio or Dolby Digital check box.

Click OK.

The sound is not output from the device if it does not support the Dolby Digital or DTS sound.

Summary of Contents for VGN-FZ11E












































































































































































Search results

Summary of Contents for VGN-FZ11E

Reviews:

Related manuals for VGN-FZ11E

Brands by name

Popular brands

Sony VGN-FZ11E, User Manual

Search results

Summary of Contents for VGN-FZ11E

Reviews:

Related manuals for VGN-FZ11E

Brands by name

Popular brands