Sony VGN-FW3 User Manual Download

Page: 50 / 188

Using Your VAIO Computer

Inserting an ExpressCard Module

Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot.

✍

You do not need to shut down your computer before inserting or removing the ExpressCard module.

To insert an ExpressCard module

Locate the ExpressCard slot.

Carefully slide the ExpressCard module into the slot until it clicks into place.
Do not force it into the slot.

✍

If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Make sure you use the most recent software driver provided by the ExpressCard module manufacturer.

Summary of Contents for VGN-FW3





























































































































































































Search results

Summary of Contents for VGN-FW3

Reviews:

Related manuals for VGN-FW3

Brands by name

Popular brands

Sony VGN-FW3, User Manual

Search results

Summary of Contents for VGN-FW3

Reviews:

Related manuals for VGN-FW3

Brands by name

Popular brands