manualshive.com logo in svg

Sony VGN-FS115B, User Manual, Page: 82 / 140

Share
Download
Sony VGN-FS115B User Manual Download Page 82

82

n

N

Connecting peripheral devices

Only left-channel audio is recorded with a monaural microphone

Proceed as follows to change the audio channel setting.

1

Click Start and then Control Panel.
The Control Panel window appears.

2

Click Sounds, Speech, and Audio Devices and then Sounds and Audio Devices.

3

Click Volume under Sound recording on the Audio tab.

4

Select Advanced Controls from the Options menu.
The Advanced button appears for Microphone Balance.

5

Click the Advanced button and select the Mono Mic check box under Other Controls.

!

This audio channel setting is only applied to sound recording with a microphone.

Stereo sound is not recorded with a stereo microphone

Proceed as follows to change the audio channel setting.

1

Click Start and then Control Panel.
The Control Panel window appears.

2

Click Sounds, Speech, and Audio Devices and then Sounds and Audio Devices.

3

Click Volume under Sound recording on the Audio tab.

4

Select Advanced Controls from the Options menu.
The Advanced button appears for Microphone Balance.

5

Click the Advanced button and deselect the Mono Mic check box under Other Controls.

  

Summary of Contents for VGN-FS115B













































































































































Reviews:

No comments