Sony VGN-FS115B User Manual Download Page 38

Page: 38 / 140

Using your VAIO computer

Removing a PC Card

Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work
properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 7.

To remove a PC Card, proceed as follows:

Double-click the Safely Remove Hardware icon in the system tray.
The Safely Remove Hardware dialog box appears.

Select the hardware you want to unplug.

Click Stop.

In the Stop a Hardware Device dialog box, confirm that the device can be safely removed from the system.

Click OK.
A dialog box appears, explaining that it is safe to remove the device.

Click OK.

Click Close.

Push the PC Card release button so that the release button pops out.

Push the PC Card release button a second time so that the PC Card pops out.

10 Gently take hold of the Card and pull it out of the slot.

11 If the PC Card release button is still out, push it back in.

Summary of Contents for VGN-FS115B













































































































































Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands

Sony VGN-FS115B, User Manual

Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands