Sony VGN-FS115B User Manual Download Page 14

Page: 14 / 140

Using your VAIO computer

Connecting a power source

You can use either an AC adapter or a rechargeable battery pack as a power source.

Using the AC adapter

To use the AC adapter, proceed as follows:

Plug one end of the power cord (1) into the AC adapter.

Plug the other end of the power cord into an AC outlet (2).

Plug the cable attached to the AC adapter (3) into the DC In connector (4) on the computer.

The shape of the DC In plug varies depending on the AC adapter.

✍

Use your computer only with the supplied AC adapter.

To disconnect your computer completely from mains voltage, unplug the AC adapter.

Make sure that the socket outlet is easily accessible.

If you do not use the AC adapter for a long period of time, put your computer into Hibernate mode. This power saving mode saves you the time of shutting down

in the normal way.

Summary of Contents for VGN-FS115B













































































































































Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands

Sony VGN-FS115B, User Manual

Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands