Sony VGN-FS115B User Manual Download Page 127

Page: 127 / 140

127

Getting help

Getting help

This section describes how to get help and support if something goes wrong with your computer.

Sony offers you many support options for your computer.

Sony support options

See Documentation pack

(page 8)

for details on the printed and online documentation delivered with your computer, as well as

further sources of reference.

Other sources of information

❑

Go to the online help files that accompany your software for instructions on using the software.

❑

VAIO-Link website: if you have any problem with your computer, you can access the VAIO-Link website for troubleshooting. Go
to

http://www.vaio-link.com

❑

e- Support: This interactive part of our website

http://www.vaio-link.com

allows you to get in contact with our dedicated support

team over the internet. Using a personalised account, you can log your technical queries with ease.

❑

VAIO-Link help lines: Before contacting VAIO-Link by telephone, try to solve the problem by reading the online and printed
documentation.

❑

Visit the other Sony websites:

❑

www.club-vaio.com

if you want to know more about VAIO and become part of the growing VAIO community.

❑

www.sonystyle-europe.com

for online purchases.

❑

www.sony.net

for other Sony products.

✍

You need to set up an Internet connection before you can access the online features described here.

Summary of Contents for VGN-FS115B













































































































































Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands

Sony VGN-FS115B, User Manual

Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands