165
Troubleshooting
Display
Why did the computer screen (LCD) go blank?
❑
The computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or
Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. See Using
the Power Saving Modes
for more information.
❑
Make sure the computer is plugged into a power source and is on. The power indicator on the computer will be on if the
computer is on.
❑
If the computer is using battery power, make sure the battery is installed properly and is charged. See Using the Battery
Pack
for more information.
❑
If the display mode is set to external display, use the Fn+F7 key combination. See Combinations and Functions with
the Fn Key
for more information.
Why can't I view the entire DVD video display on a TV screen?
The display resolution may not be properly set. It is recommended that you adjust the display resolution to 1024 x 768 or
smaller, depending on the size of the external display screen.
How do I adjust the image on the TV screen?
Use the controls on your external display to adjust the image. See the manual that accompanied your display for more
information.
