Sony VGN-FE11H User Manual Download Page 143

Page: 143 / 192

143

Troubleshooting

What should I do if a BIOS error appears when my computer starts?

If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of the screen

Press the F2 key.
The BIOS setup screen appears.

Set the date (month/day/year). Press Enter.

Press the

key to select System Time, and then set the time (hour: minute: second). Press the Enter key.

Press the

key to select the Exit tab, and then press the F9 key.

The message Load default configuration now? appears.

Select Yes, and press the Enter key.

Select Exit Setup, and press the Enter key.
The message Save configuration changes and exit now? appears.

Select Yes, and press the Enter key.
The computer restarts.

If this occurs on a regular basis, contact VAIO-Link.

What should I do if the power indicator (Green) lights but my screen does not display
anything when I turn on my computer?

If nothing still appears on your screen after a while

Press the power button for more than four seconds to check that the power indicator goes out. Then turn on the computer
again.

If nothing still appears on your screen, unplug the AC adapter, remove the battery, and leave the computer for about a
minute. Then plug in the AC adapter, install the battery, and turn on the computer again.

Summary of Contents for VGN-FE11H

































































































































































































Search results

Summary of Contents for VGN-FE11H

Reviews:

Related manuals for VGN-FE11H

Brands by name

Popular brands

Sony VGN-FE11H, User Manual

Search results

Summary of Contents for VGN-FE11H

Reviews:

Related manuals for VGN-FE11H

Brands by name

Popular brands