Sony VGN-CR42S/B User Manual Download

Page: 79 / 192

Using Peripheral Devices

Connecting a TV

You can connect a TV to your computer.

To connect a TV to your computer

Plug the power cord of your TV into an AC outlet.

Plug one end of an S Video cable (not supplied) into the

S VIDEO OUT

port on the computer and the other end to the TV.

Plug one end of an audio cable (not supplied) into the headphones jack on the computer and the other end to the TV.

Switch the input channel of the TV to external input.

Set up the TV configuration system.

✍

See the manual that came with your TV for more information on installation and use.

If the display resolution of your computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. If you want to display
the full image, change the display resolution of the computer to 1024 x 768 pixels or lower.

Summary of Contents for VGN-CR42S/B

































































































































































































Search results

Summary of Contents for VGN-CR42S/B

Reviews:

Related manuals for VGN-CR42S/B

Brands by name

Popular brands

Sony VGN-CR42S/B, User Manual

Search results

Summary of Contents for VGN-CR42S/B

Reviews:

Related manuals for VGN-CR42S/B

Brands by name

Popular brands