Sony VGN-CR11S/L User Manual Download Page 77

Page: 77 / 186

Using Peripheral Devices

Connecting an External Display

You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.

✍

Connect the power cord after connecting all other cables.

Connected external displays are used as secondary screens.

On the Windows operating system, you can also use an external display to set up multiple monitors.

Connecting a Computer Display

You can connect a computer display (monitor) to your computer.

To connect a computer display

If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.

Plug the display cable (2) (not supplied) into the monitor (VGA) port (3)

on the computer.

Summary of Contents for VGN-CR11S/L



























































































































































































Search results

Summary of Contents for VGN-CR11S/L

Reviews:

Related manuals for VGN-CR11S/L

Brands by name

Popular brands

Sony VGN-CR11S/L, User Manual

Search results

Summary of Contents for VGN-CR11S/L

Reviews:

Related manuals for VGN-CR11S/L

Brands by name

Popular brands