Sony VGN-C1S - VAIO - Core 2 Duo 1.66 GHz User Manual Download

Page: 83 / 183

Using Peripheral Devices

Alternatively, you can disconnect the computer from the docking station as follows:

Click Start and then Undock Computer.

Make sure that a message balloon appears and the IN USE indicator turns off; and then lift the computer away from the
docking station.

Close the docking station connector cover on the bottom of the computer.

✍

It is extremely important to close the docking station connector cover after disconnecting your computer from the docking station. If the cover is left
open, dust may get inside and damage the computer.

To disconnect the docking station completely from AC power, unplug the AC adapter.

Summary of Contents for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz
























































































































































































Search results

Summary of Contents for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Reviews:

Related manuals for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Brands by name

Popular brands

Sony VGN-C1S - VAIO - Core 2 Duo 1.66 GHz, User Manual

Search results

Summary of Contents for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Reviews:

Related manuals for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Brands by name

Popular brands