Sony VGN-C1S - VAIO - Core 2 Duo 1.66 GHz User Manual Download

Page: 52 / 183

Using Your VAIO Computer

Removing a Memory Stick Media

To remove a Memory Stick media

Check that the Memory Stick PRO/Duo media indicator is off.

Push the Memory Stick media in toward the computer.
The Memory Stick media ejects.

Pull the Memory Stick media out of the slot.

Always remove the Memory Stick media gently, or it may pop out unexpectedly.

Do not remove the Memory Stick media while the Memory Stick PRO/Duo media indicator is turned on. If you do, you may lose data. Large volumes

of data may take time to load, so be sure the indicator is off before removing the Memory Stick media.

Summary of Contents for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz
























































































































































































Search results

Summary of Contents for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Reviews:

Related manuals for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Brands by name

Popular brands

Sony VGN-C1S - VAIO - Core 2 Duo 1.66 GHz, User Manual

Search results

Summary of Contents for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Reviews:

Related manuals for VGN-C1S - VAIO - Core 2 Duo 1.66 GHz

Brands by name

Popular brands