Sony VGN-BX41VN User Manual Download Page 105

Page: 105 / 222

105

Using Peripheral Devices

To select the Multiple Monitors mode

The monitor (VGA) port on your computer is not accessible when the computer is attached to the multi function bay docking station.

To find which video controller your model includes, see the online Specifications.

Models with the ATI video controller

Click Start and Control Panel.

Click Adjust screen resolution under Appearance and Personalization.

Click the monitor icon marked 2.

Select the Extend my Windows desktop onto this monitor option.

Click Apply and then OK.
If the Monitor Settings window appears, click Yes.

Models with the Intel Graphics Media Accelerator

Right-click on the desktop and select Personalize from the shortcut menu.

Click Display Settings.
The Display Settings window appears.

Follow the on-screen instructions to change the settings.

Summary of Contents for VGN-BX41VN































































































































































































































Search results

Summary of Contents for VGN-BX41VN

Reviews:

Related manuals for VGN-BX41VN

Brands by name

Popular brands

Sony VGN-BX41VN, User Manual

Search results

Summary of Contents for VGN-BX41VN

Reviews:

Related manuals for VGN-BX41VN

Brands by name

Popular brands