Sony VGN-BX194VP User Manual Download Page 96

Page: 96 / 182

Using Peripheral Devices

Connecting a Computer Display

You can connect a computer display (monitor) either directly to your computer or via the optional multi function bay docking
station.

To connect a computer display

The monitor (VGA) port on the computer is disabled when attached to the multi function bay docking station.

If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet.

If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3)

on the

computer or on the multi function bay docking station.

If you want to connect a TFT/DVI monitor, plug the display cable (not supplied) into the DVI-D port on the multi function
bay docking station.

✍

DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI connector that supports only digital video signals (no analog video signals). It has
24 pins.

A DVI-I connector (Digital Visual Interface - Integrated) supports digital video and analog video signals. It has 29 pins.

Summary of Contents for VGN-BX194VP























































































































































































Search results

Summary of Contents for VGN-BX194VP

Reviews:

Related manuals for VGN-BX194VP

Brands by name

Popular brands

Sony VGN-BX194VP, User Manual

Search results

Summary of Contents for VGN-BX194VP

Reviews:

Related manuals for VGN-BX194VP

Brands by name

Popular brands