Sony VGN-BX194VP User Manual Download Page 52

Page: 52 / 182

Using Your VAIO Computer

Inserting a Memory Card

To insert a memory card

Locate the SD card slot on the front of the computer.

Insert the memory card into the slot, in the direction of the arrow on the media.
Do not force the card into the slot.

✍

If the memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

Removing a Memory Card

Do not remove a memory card while the Media Access indicator light is on. The card or its data may become damaged.

To remove a memory card

Press the extended part of the memory card, causing it to extend out from the slot.

When the card extends, carefully pull it out of the slot.

Summary of Contents for VGN-BX194VP























































































































































































Search results

Summary of Contents for VGN-BX194VP

Reviews:

Related manuals for VGN-BX194VP

Brands by name

Popular brands

Sony VGN-BX194VP, User Manual

Search results

Summary of Contents for VGN-BX194VP

Reviews:

Related manuals for VGN-BX194VP

Brands by name

Popular brands