Sony VGN-AR11B User Manual Download

Page: 98 / 194

Using Peripheral Devices

If your TV is equipped with an HDMI port, you can also use an HDMI cable (not supplied) to connect it to your computer.

To connect an HDMI-compatible TV to your computer

Plug the power cord of the TV into an AC outlet.

Plug one end of an HDMI cable to the HDMI port on the computer and the other end to the TV.

Switch the input channel of the TV to external input.

Set up the TV configuration system.

If your TV is equipped with an HDMI connector and a DVI-D connector, we recommend that you use the HDMI connector.

The HDMI cable carries both video and audio signals.

If device drivers other than the ones provided by Sony are used, the image may not be displayed and the audio may not be heard. Always use the device

driver provided by Sony for updates.

You can connect the HDMI out to an AV amplifier and audio will be heard through the AV amplifier and then another HDMI cable can be connected from

the AV amplifier to the TV for the display.

✍

See the manual that came with your peripheral for more information on installation and use.

If the display resolution of the computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. The hidden area on your

TV can be seen by moving the cursor on the computer. If you want to display the full image, change the display resolution of the computer to 1024 x
768 pixels or lower.

Summary of Contents for VGN-AR11B



































































































































































































Search results

Summary of Contents for VGN-AR11B

Reviews:

Related manuals for VGN-AR11B

Brands by name

Popular brands

Sony VGN-AR11B, User Manual

Search results

Summary of Contents for VGN-AR11B

Reviews:

Related manuals for VGN-AR11B

Brands by name

Popular brands