Sony VGN-A517B User Manual Download Page 190

Page: 190 / 198

190

Troubleshooting

Troubleshooting Printers

❑

Make sure that the printer driver supports Windows XP.
Ask the manufacturer of your printer for the driver that supports Windows XP.

❑

The printer port

on the port replicator is internally connected to the USB. If your printer is connected to the printer port

on the port replicator, proceed as follows to check the printer port settings.

Click Start and then Control Panel.

Click the Printers and Other Hardware icon.

Click the Printers and Faxes icon.

Right-click the printer to select Properties.

Click the Ports tab.

Check if the check box for USB001 is selected. If another check box is selected, click the box for USB001.

Click OK.

If the above procedure does not work, right-click the printer and selected "Delete" on the window in step 3 above to delete
the printer. Then, install the printer driver once again.

Summary of Contents for VGN-A517B







































































































































































































Search results

Summary of Contents for VGN-A517B

Reviews:

Related manuals for VGN-A517B

Brands by name

Popular brands

Sony VGN-A517B, User Manual

Search results

Summary of Contents for VGN-A517B

Reviews:

Related manuals for VGN-A517B

Brands by name

Popular brands