Sony VGN-A517B User Manual Download Page 188

Page: 188 / 198

188

Troubleshooting

Only left-channel audio is recorded with a monaural microphone

This troubleshooting entry applies to VGN-A series models only.

Proceed as follows to change the audio channel setting.

Click Start and then Control Panel.
The Control Panel window appears.

Click Sounds, Speech, and Audio Devices and then Sounds and Audio Devices.

Click Volume under Sound recording on the Audio tab.

Select Advanced Controls from the Options menu.
The Advanced button appears for Microphone Balance.

Click the Advanced button and select the Mono Mic check box under Other Controls.

This audio channel setting is only applied to sound recording with a microphone.

Stereo sound is not recorded with a stereo microphone

This troubleshooting entry applies to VGN-A series models only.

Proceed as follows to change the audio channel setting.

Click Start and then Control Panel.
The Control Panel window appears.

Click Sounds, Speech, and Audio Devices and then Sounds and Audio Devices.

Click Volume under Sound recording on the Audio tab.

Select Advanced Controls from the Options menu.
The Advanced button appears for Microphone Balance.

Click the Advanced button and deselect the Mono Mic check box under Other Controls.

Summary of Contents for VGN-A517B







































































































































































































Search results

Summary of Contents for VGN-A517B

Reviews:

Related manuals for VGN-A517B

Brands by name

Popular brands

Sony VGN-A517B, User Manual

Search results

Summary of Contents for VGN-A517B

Reviews:

Related manuals for VGN-A517B

Brands by name

Popular brands