Sony VGC-VA1 User Manual Download

Page: 65 / 142

Using Your VAIO Computer

To connect to a wireless network (Models with the VAIO Wireless Utility software only)

Use the

VAIO Wireless Utility

software to guide you through the set up process and provide you with more detailed

information about wireless connections.

Make sure an access point is set up.
See the instructions that accompanied the access point for more information.

Turn on the

WIRELESS

WIRELESS LAN

switch.

The WIRELESS LAN indicator lights up.

Click

Start

, point to

All Programs

, and click

VAIO Wireless Utility

The

VAIO Wireless Utility

appears.

Follow the on-screen instructions.

To disconnect from a wireless network

Turn off the

WIRELESS

WIRELESS LAN

switch.

Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.

✍

The WPA (Wi-Fi Protected Access) key needs to contain at least 8 characters.

Summary of Contents for VGC-VA1















































































































































Search results

Summary of Contents for VGC-VA1

Reviews:

Related manuals for VGC-VA1

Brands by name

Popular brands

Sony VGC-VA1, User Manual

Search results

Summary of Contents for VGC-VA1

Reviews:

Related manuals for VGC-VA1

Brands by name

Popular brands