Sony VGC-VA1 User Manual Download

Page: 135 / 142

136

Troubleshooting

Speakers

Why won't my speakers work?

❑

The speaker volume may have been turned off. Press the

MONITOR OFF

button on the front of the computer or press

the Mute button on the keyboard.

❑

The keyboard also has a volume control, make sure the volume is turned up loud enough to hear sound.

Why can't I hear sound from my speakers?

❑

If you are using a program that has its own volume control, make sure the volume control is properly set. See that
program's help guide for more information.

❑

Your speakers may be set to mute, the volume setting may be too low, or the audio option may be disabled.

❑

The speaker volume may have been turned off. Press the

MONITOR OFF

button on the front of the computer or press

the Mute button on the keyboard.

❑

The keyboard also has a volume control, make sure the volume is turned up loud enough to hear sound.

❑

Check the volume controls in Windows.

Summary of Contents for VGC-VA1















































































































































Search results

Summary of Contents for VGC-VA1

Reviews:

Related manuals for VGC-VA1

Brands by name

Popular brands

Sony VGC-VA1, User Manual

Search results

Summary of Contents for VGC-VA1

Reviews:

Related manuals for VGC-VA1

Brands by name

Popular brands