Sony VGC-RT2SRY User Manual Download Page 65

Page: 65 / 209

Using Your VAIO Computer

Setting up TV Enhance pour VAIO

The

TV Enhance pour VAIO

is available on French models sold in France only.

The

TV Enhance pour VAIO

allows you to watch and record free-to-air standard definition and high definition digital

terrestrial TV, improving your multimedia experience.

To launch the application, start the

Windows Media Center

and go to

TNT

and select:

❑

TV en direct

: to start watching live TV.

❑

TV enregistrée

: to access your TV recordings.

❑

Guide

: to consult the electronic program guide.

❑

TV + menu

: to watch live TV and have easy access to settings.

The first time you launch the

TV Enhance pour VAIO

, the setup wizard will pop up. Follow the on-screen instructions to

configure the application.

When you want to re-scan channels or to change location, go to the

Menu

and

Paramètres

, and then click

Paramètres

signal

Rechercher les chaînes

. See the help file included with the software for more information.

✍

On models with a dual DVB-T TV tuner board, you can record up to two digital channels at the same time, or watch a TV program while recording
another.

The supplied remote commander can also be used in the

TV Enhance pour VAIO

but the following buttons are reserved for the

Windows Media Center

Live TV, Recorded TV, Guide, DVD and More.

Summary of Contents for VGC-RT2SRY


















































































































































































































Search results

Summary of Contents for VGC-RT2SRY

Reviews:

Related manuals for VGC-RT2SRY

Brands by name

Popular brands

Sony VGC-RT2SRY, User Manual

Search results

Summary of Contents for VGC-RT2SRY

Reviews:

Related manuals for VGC-RT2SRY

Brands by name

Popular brands