Sony VGC-RM1 User Manual Download

Page: 75 / 170

Using Peripheral Devices

Connecting a Digital Video Camcorder

✍

You need to flip down the left front panel to access the i.LINK port on the front of the access unit.

To connect a digital video camcorder

Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV
In/Out port (3) on the digital video camcorder.

Launch the DVgate Plus software.

✍

On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible.

The Sony digital video camcorder shown here is an example; your digital video camcorder may need to be connected differently.

You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection.

Summary of Contents for VGC-RM1











































































































































































Search results

Summary of Contents for VGC-RM1

Reviews:

Related manuals for VGC-RM1

Brands by name

Popular brands

Sony VGC-RM1, User Manual

Search results

Summary of Contents for VGC-RM1

Reviews:

Related manuals for VGC-RM1

Brands by name

Popular brands