Sony VGC-RM1 User Manual Download

Page: 103 / 170

103

Upgrading Your VAIO Computer

Replacing the Lithium Battery

The lithium battery starts to weaken after several years and the system settings, such as the date and time stored in CMOS
RAM, may become inaccurate. Replace the lithium battery when this occurs.

There is danger of the battery exploding if it is replaced incorrectly. Replace the battery only with a CR2032-type lithium battery.

To replace the lithium battery

Write down any changes you may have made to the settings in the BIOS Setup utility.

Remove the top panel of the main unit.
See Removing and Replacing the Main Unit Top Panel

(page 87)

for the detailed instructions.

Remove the two screws from the chassis brace (1) and take out the brace.

Summary of Contents for VGC-RM1











































































































































































Search results

Summary of Contents for VGC-RM1

Reviews:

Related manuals for VGC-RM1

Brands by name

Popular brands

Sony VGC-RM1, User Manual

Search results

Summary of Contents for VGC-RM1

Reviews:

Related manuals for VGC-RM1

Brands by name

Popular brands