Sony VGC-LS1 - Vaio All-in-one Desktop Computer User Manual Download Page 61

Page: 61 / 168

Using Your VAIO Computer

To connect the remote sensor control

Plug the cable from the remote sensor control (1) into either jack (1 or 2) on the back of the remote sensor (2).

Remove the adhesive tape cover from the bottom of the remote sensor control (1).

Attach the remote sensor control (1) onto the set-top box (3) near the infrared port (4).

Do not cover the infrared port when attaching the remote sensor control.

The remote sensor must be visible in a line-of-sight with the remote commander in order to function properly.

Summary of Contents for VGC-LS1 - Vaio All-in-one Desktop Computer









































































































































































Search results

Summary of Contents for VGC-LS1 - Vaio All-in-one Desktop Computer

Reviews:

Related manuals for VGC-LS1 - Vaio All-in-one Desktop Computer

Brands by name

Popular brands

Sony VGC-LS1 - Vaio All-in-one Desktop Computer, User Manual

Search results

Summary of Contents for VGC-LS1 - Vaio All-in-one Desktop Computer

Reviews:

Related manuals for VGC-LS1 - Vaio All-in-one Desktop Computer

Brands by name

Popular brands