Sony VGC-LS1 - Vaio All-in-one Desktop Computer User Manual Download Page 124

Page: 124 / 168

124

Troubleshooting

What should I do if the power indicator (Green) lights but my computer screen stays
blank?

❑

If the orange MONITOR OFF indicator is on, press the MONITOR OFF button.

❑

Otherwise, follow these steps:

Press and hold the power button for more than four seconds to check that the power indicator goes out. Then turn on
your computer again.

If your computer screen still stays blank, unplug the AC adapter and leave the computer for about five minutes. Then
plug in the AC adapter and turn on the computer again.

Summary of Contents for VGC-LS1 - Vaio All-in-one Desktop Computer









































































































































































Search results

Summary of Contents for VGC-LS1 - Vaio All-in-one Desktop Computer

Reviews:

Related manuals for VGC-LS1 - Vaio All-in-one Desktop Computer

Brands by name

Popular brands

Sony VGC-LS1 - Vaio All-in-one Desktop Computer, User Manual

Search results

Summary of Contents for VGC-LS1 - Vaio All-in-one Desktop Computer

Reviews:

Related manuals for VGC-LS1 - Vaio All-in-one Desktop Computer

Brands by name

Popular brands